Hydrodynamic behavior of liquid flow in a rotating packed bed

Rotating Packed Bed (RPB) technology has emerged as a promising technology for reducing carbon footprint of various petrochemical processes by leveraging the HiGee field-induced mass transfer enhancement and allow for better capture of greenhouse gases. Despite its potential, there are still significant challenges that hinder the effective utilization of RPB technology in process intensification. Specifically, the hydraulics of liquid and gas phases within RPB packings present a significant challenge. In this study, 2D - VOF approach is employed to study the behavior of liquid droplets impacting on single rotating wire and on a whole rotating wire mesh within a Rotating Packed Bed (RPB). A comprehensive computational fluid dynamics (CFD) model is developed to analyze the influence of rotating speed, liquid velocity, and droplet diameter on the dynamics of liquid droplets. The boundaries of splashing - no splashing and dripping - capture breakup modes were validated for a single rotating wire and identified for wire mesh in RPBs by constructing the corresponding regime maps. This is achieved thanks to a new data processing algorithm that applies the principle of neighborhood aggregation. The proposed data processing algorithm helps reconstruct the regime maps for the various breakup phenomena within RPBs. The results show that the splashing mechanism reproduces higher-velocity detached daughter droplets, while the momentum-induced dripping mechanism results in low velocity daughter droplets. The results also reveal that the deposited liquid film with the wires has a key role in enhancing the splashing phenomena in RPBs. The radial distribution of diameter and velocity of liquid droplets in RPB is also analyzed in light of the droplet impact dynamics. The increase in the average liquid velocity with radial direction was attributed to the increase of splashed drops, which led to a bigger number of high velocity droplets. The conclusions of this study can be used to help improve the dynamics of the two-phase flow within RPBs through a better packing design and flow conditions.(c) 2023 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.