Axial compression behavior and stress-strain relationship of slurry-wrapping treatment recycled aggregate concrete-filled steel tube short columns

The utilization of recycled concrete can effectively solve the problems of large accumulations of construction waste and the constant consumption of natural aggregates. Slurry-wrapping modification and concrete-filled steel tubes (CFSTs) are effective approaches to enhance the utilization ratio of recycled concrete. The study involved 4 ordinary CFST columns and 16 slurry-wrapping recycled aggregate concrete-filled steel tube (SRACFST) columns. The variable parameters included the slurry-wrapping recycled aggregate replacement ratio and the section form. The result shows that the ultimate strength of the specimens reached the minimum and maximum at 25 and 100% aggregate replacement ratio. The favorable strength performance of the SRACFST columns is attributed to the dominant positive effect of the slurry-wrapping treatment in reducing matrix porosity over the negative impact of the recycled aggregate's complex interface transition zone. Due to the hoop factor, the residual bearing ratio peaks at a 25% substitution ratio. Four design standards were used to predict the ultimate strength, with GB50936 and EC4 yielding more accurate estimations, while AISC360-10 and AIJ provided conservative estimations. This study presents the equations of the stress-strain curve for the whole axial compression process, which can be directly applied in the theoretical and numerical analysis of RACFST columns.