A review of innovative approaches for onsite management of PFAS-impacted investigation derived waste

The historic use of aqueous film-forming foam (AFFF) has led to widespread detection of per- and polyfluoroalkyl substance (PFAS) in groundwater, soils, sediments, drinking water, wastewater, and receiving aquatic systems throughout the United States (U.S.). Prior to any remediation activities, in order to identify the PFAS-impacted source zones and select the optimum management approach, extensive site investigations need to be conducted. These site investigations have resulted in the generation of considerable amount of investigation-derived waste (IDW) which predominantly consists of well purging water and drill fluid, equipment washing residue, soil, drill cuttings, and residues from the destruction of asphalt and concrete surfaces. IDW is often impacted by varying levels of PFAS which poses a substantial challenge concerning disposal to prevent potential mobilization of PFAS, logistical complexities, and increasing requirement for storage as a result of accumulation of the associated wastes. The distinct features of IDW involve the intermittent generation of waste, substantial volume of waste produced, and the critical demand for onsite management. This article critically focuses on innovative technologies and approaches employed for onsite treatment and management of PFAS-impacted IDW. The overall objective of this study centers on developing and deploying end-of-life treatment technology systems capable of facilitating unrestricted disposal, discharge, and/or IDW reuse on-site, thereby reducing spatial footprints and mobilization time.