Sodium metabisulfite as a copper depressant in the selective flotation of copper-molybdenum concentrate using seawater

The main challenge for the selective flotation of copper and molybdenum (Cu-Mo) sulfide minerals in seawater is the formation of colloidal precipitates in strongly alkaline conditions. These precipitates hinder the selective separation of copper from molybdenum minerals in seawater by lowering the floatability of Cu-Mo sulfide minerals. The present study aimed to examine the direct utilization of seawater in the selective flotation of Cu-Mo sulfides. Additionally, the effectiveness of sodium metabisulfite (Na2S2O5) as a copper depressant for selective flotation of Cu-Mo sulfides in seawater was studied under weakly acidic, neutral, and moderately alkaline conditions. A complex Cu-Mo concentrate that largely consisted of chalcopyrite and molybdenite, as well as a tiny amount of pyrite and quartz, was used in the flotation tests. The flotation results revealed that treatment with 3.6 kg/t Na2S2O5 in seawater at pH 5.5 significantly lowered the copper recovery from 97% to 11% and caused a modest reduction in the molybdenum recovery from 98% to 94% with a Cu-Mo separation efficiency of 83%. These flotation results demonstrate that Na2S2O5 treatment in seawater selectively depresses the floatability of copper minerals. Consequently, molybdenum can be separated from copper minerals under a weakly acidic condition in seawater. In addition, this study discusses the effects of various pH conditions and dosages of Na2S2O5. The surface properties of Cu-Mo minerals were studied using X-ray photoelectron and infrared spectroscopies, and a mechanism to explain the selective flotation of Cu-Mo using Na2S2O5 treatment in seawater is proposed.(c) 2023 The Society of Powder Technology Japan. Published by Elsevier BV and The Society of Powder Technology Japan. All rights reserved.