Facile fabrication of porous carbon nanofibers encapsulated with nanoscale exposed Ni for producing high-purity hydrogen from cheap glycerol

Transition metal nanoparticles supported on porous carbon materials as hydrothermal stable and highly effective catalysts are increasingly attracting worldwide attention. Herein, a controllable electrospinning technique was employed to prepare the promising catalysts to produce hydrogen. Different proportions of polymethyl methacrylate and nickel nitrate were introduced into polyacrylonitrile spinning solution to prepare nano scale Ni encapsulated in porous carbon nanofiber (Ni@PCNF) through an in-situ pore making strategy. The results show that the prepared 10 wt% Ni@PCNF catalyst possesses an enhanced specific surface area, hierarchical porous structure, and uniformly-dispersed Ni nanoparticles (-17 nm). This porous and fibrous catalyst presents relatively high performance of producing high-purity H2 by aqueous phase reforming of glycerol compared with several reference catalysts on different supports (e.g., activated carbon fibers and g-Al2O3) under similar reaction conditions. The selectivity and purity of H2 produced by 10 wt % Ni@PCNF catalyst at 260 degrees C for 1 h are nearly 100% and 93%, respectively. This is related to the moderate catalytic activity of active Ni nanoparticles encapsulated in PCNFs. By contrast, those Ni nanoparticles supported on the reference supports show a high catalytic activity and thus produce low-purity H2 due to the considerable byproducts of CH4, CO and CO2. Moreover, Ni@PCNF catalyst exhibits a good structure stability and reuse effect in comparison with reference catalysts. This work provides a roadmap for preparing effective and stable Ni-based catalysts to produce high-purity H2 from cheap glycerol through a low temperature thermocatalysis. (c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.