Development and validation of a method for preparing heated tobacco product aerosol condensate (HTPAC) for large-scale toxicity data acquisition

A method of preparing heated tobacco product aerosol condensate (HTPAC) was developed to expedite HTP toxicity evaluation, and the effectiveness was assessed. To prepare HTPAC, HTP aerosol was generated and collected using a Cambridge filter (particulate phase) and Dulbecco's phosphate buffered saline (DPBS; gaseous phase). The aerosol collected on the Cambridge filter was extracted using methanol, which was thereafter removed by nitrogen purging. The HTP aerosol residue was mixed with DPBS loaded with the collected HTP vapor, ultimately yielding HTPAC. Nicotine and formaldehyde, key harmful compounds in HTP aerosol, were detected in HTPAC (901 +/- 224 and 22.2 +/- 3.90 mu g stick(-1), respectively, comparable to those in HTP aerosol (990-1350 (nicotine) and 2.33-21.9 mu g stick(-1) (formaldehyde)). Propylene glycol and vegetable glycerin, which influence the amount of HTP aerosol, were detected at similar levels in HTPAC and HTP aerosol (propylene glycol = 616 +/- 57.1 (HTPAC) and 320-630 mu g stick(-1) (aerosol) and vegetable glycerin = 2418 +/- 224 (HTPAC) and 1667-4000 mu g stick(-1) (aerosol)). Known components of HTP aerosol (hydroxyacetone, acetic acid, triacetin, and 2-furanmethanol) were also detected in HTPAC. Consequently, HTPAC offers an effective method for concentrating harmful compounds found in HTP aerosols. This, in turn, facilitates comprehensive toxicity assessments, paving the way for guidelines ensuring the safe utilization of HTP.