An in-depth study on melting performance of latent heat thermal energy storage system under rotation mechanism by fluctuating heat source

The Organic Rankine Cycle (ORC) is a reliable and efficient means of converting solar energy into electricity. The challenges brought about by the unpredictable nature of solar energy can be effectively mitigated by utilizing latent heat thermal energy storage (LHTES) technology, specifically by implementing heat source pretreatment. This paper investigates the thermal storage properties of a rotating triplex-tube LHTES unit under different si-nusoidal fluctuating heat sources. A transient numerical model is built to analyze the effects of sinusoidal wall temperature amplitude and angular velocity on the melting characteristics of the unit, including melting time, heat storage rate, and temperature response. The design is further analyzed using the Taguchi method. The results show that the angular velocity of the sinusoidal wall temperature has a greater effect on the average heat storage rate and melting time than the amplitude. When the amplitude is set to 10 and the angular velocity to 0.02, the melting time is decreased by 8.7%, while the average heat absorption rate and average temperature response increase by 10.21% and 12.27%, respectively. Additionally, the sensible and total heat energy ab-sorption increase by 2.23% and 0.62%, compared to the initial heat source condition. Furthermore, the heat transfer is enhanced through the introduction of Al2O3 nanoparticles at varying percentages. The unit heat storage rate improves significantly with an increasing percentage of nanoparticles. Specifically, when 2.5% and 5% Al2O3 nanoparticles are added, the melting time of the unit is reduced by 3.77% and 15.07%, respectively, while the average heat absorption rate increases by 2.43% and 10.39%.