Decomposition Mechanism of Prior Austenite in Low-Temperature Zone and Its Relationship to Fracture Behavior of High-Strength Medium-Mn Steel

Herein, the isothermal and continuous cooling transformation mechanisms of prior austenite and its relationship to fracture behavior of high-strength medium-Mn steel are studied. Furthermore, the precipitation behavior of cementite is also analyzed. The results indicate that the short rod-like cementite forms in the martensite matrix during the air-cooling process, the solubility difference of supersaturated elements provides a driving force for the element diffusion. Accordingly, it is proved that no isothermal transformation of prior austenite occurs during the 360 ? x 7 days isothermal treatment. The lath-like microstructure is the martensite, which is produced during the subsequent continuous cooling process. The prior austenite is "divided" by the preferential martensite (transformed via heterogeneous nucleation), and the interfaces between preferential martensite and untransformed austenite provide nucleation sites for the subsequent martensite. The introduction of initial martensite before the isothermal treatment leads to the reversible brittleness of medium-Mn steel. The fracture strength decreases with the increase of the initial martensitic fraction and isothermal time. The grain boundary binding force of prior austenite grains (PAGs) increases in the experimental steels subjected to annealing, and the plastic deformation of the martensite matrix is prior to grain boundary cracking, which inhibits the intergranular brittle fracture.