Improved virus concentration methods for wash waters from decontamination of permeable and non-permeable surfaces

Surface decontamination is a method of using wash water to decontaminated surfaces preventing transmission of biological contaminants that can pose potential health risks to responders and the public. However, the risks associated with handling used wash water are largely unknown due to the lack of effective methodology to screen for pathogenic microorganisms present in these samples, especially viral pathogens. This study adapted the dead-end hollow-fiber ultrafiltration (D-HFUF) system to wash waters, including a separate procedure for recovering particle attached viruses. Simulated wash water was created using dechlorinated tap water containing a mild surfactant (0.05 % Tween 80). To determine virus recovery efficiencies, measured amounts of somatic and F+ coliphage were spiked into 2-liter volumes of wash water under the following scenarios: (1) wash water was amended with a measured amount of sterile river sediment with no sediment separation prior to filter concentration; or (2) sediment added to wash water was allowed to settle prior to filter concentrating clarified liquid portions, while precipitated sediment was subjected to viral extraction techniques to recover particle attached virus; and (3) the optimized method was deployed on non-porous and porous surfaces to simulate a decontamination clean-up event. Separation of sediment prior to D-HFUF significantly increased recovery of coliphages, (P = <0.0001) versus filtration of sediment and liquids simultaneously. A tryptic soy broth (TSB) elution solution was significantly more effective (P = <= 0.010) for recovery of both somatic and F+ coliphage, (108 +/- 9 % and 92 +/- 9 %, respectively), compared to elution buffers containing various surfactants (sodium hexametaphosphate, Tween 80) for recovering particle attached virus. Simulating a biocontaminate clean-up event (using the optimized sediment separation and elution protocol) resulted in coliphage recoveries of 75-96 % (permeable surface) and 71-92 % (non-permeable surface). This procedure can be used to effectively detect viruses in used wash waters aiding in reducing risks to human health during site decontamination.