Research on Speed Optimization and Adjusting Strategy of Variable Speed Diesel Generator Base on Sliding Interval

A marine variable speed generator can dynamically adjust the set speed of a diesel engine according to the actual power load level by the grading method, so the goal of energy conservation is achieved. However, the grading method relies on engineering experience. The actual range of power load fluctuation is uncertain, which leads to a decrease in fuel efficiency. Therefore, a method based on load sliding interval is put forward. In this method, a fixed width load interval is set at first, and then the interval slides on the diesel engine load at a step of 1%. The minimum fuel consumption rate speed for the interval is optimized during the sliding process. Finally, a minimum fuel consumption rate speed curve corresponding to the sliding interval position is obtained. The optimization objective is to have the minimum weighted average fuel consumption rate at the integer load points within each interval. The actual power load is monitored and used to determine the current load interval during the calculation of the set speed. The minimum fuel consumption rate speed curve optimized was applied to query the setting value of the diesel speed. The mean value engine model was applied for simulation under three load conditions. The results show that the sliding interval method could achieve the best fuel saving effect under any power load; the set value of the diesel engine speed changed smoothly under the fluctuating power load conditions, and the fuel saving ability was better according to the actual power load conditions on the ship.