A Novel Approach for Elimination of Defects of Blocking and Unblocking in Distance Relays during Power Swing

In power systems, distance relays are commonly employed as the primary protection for transmission lines, and their operation is of utmost importance. Power swings are a type of phenomenon that can lead to improper functioning of conventional distance relays, posing a threat to the uninterrupted flow of electrical power. The occurrence of a power swing disrupts the impedance measured by the relay, causing it to deviate from the normal load condition and enter the relay tripping zones. This research paper introduces a novel method based on the Prony method for extracting current waveform components, enabling fault detection during power swings. Subsequently, the proposed method's accuracy is assessed through simulations implemented on a nine-bus power system, involving three-phase current signal processing and the application of the proposed algorithm. Various fault scenarios encompassing varying fault distances from the relay position, fault resistances, and power angles within the 9-bus system are simulated to encompass a wide range of fault environments. The simulation results demonstrate the effectiveness of the proposed algorithm in detecting all types of faults, including symmetrical and asymmetrical faults, during power swings.