Conducting Polymer Coatings Prepared by Mixed Emulsions Are Highly Conductive and Stable in Water

An aqueous emulsion of conducting polymer is commonly applied on a substrate to form a coating after drying. The coating, however, disintegrates in water. This paper reports a coating prepared using a mixture of two emulsions: an aqueous emulsion of conducting polymer, and an aqueous emulsion of hydrophobic and rubbery chains copolymerized with silane coupling agents. When applied on a substrate and dried, particles of the mixed emulsion merge into a continuous film. While the conducting polymer forms percolated nanocrystals, the silane groups crosslink the rubbery chains and interlink the rubbery chains to the substrate. The percolated nanocrystals make the coating highly conductive. The covalent network of hydrophobic polymer chains stabilizes the coating in water. The high conductivity and stability in water may enable broad applications. A conducting polymer coating is prepared by a mixture of two emulsions: an aqueous emulsion of conducting polymer, and an aqueous emulsion of hydrophobic and rubbery chains copolymerized with silane coupling agents. The coating features percolated nanocrystals which make the coating highly conductive, and the hydrophobic covalent network which stabilizes the coating in water.image