On the phase and grain boundaries in dual phase carbide/boride ceramics from micro to atomic level

The phase and grain boundary characteristics of recently developed fine-grained dual-phase high-entropy (Ti-Zr-Nb-Hf-Ta)C/(Ti-Zr-Nb-Hf-Ta)B2 was investigated throughout all the accessible length scales using scanning electron microscopy (SEM), aberration-corrected scanning transmission electron microscopy (STEM), energy dispersive X-ray spectroscopy (EDS) and electron energy loss spectroscopy (EELS). The system exhibits relatively homogeneous grain size distribution where the average size is approximately 0.97 µm, with chemical composition (Ti0.14 Zr0.2 Nb0.2 Hf0.2 Ta0.26)C + (Ti0.38 Zr0.18 Nb0.22 Hf0.115 Ta0.105)B2. SEM analyses revealed no micro-crack formation and second – phase segregation at the boundaries or micro-pores at the triple – points. Investigation down to the sub-nanometer scale revealed that the phase and grain boundaries were typically clean and sharp with an indistinct 1 – 1.5 nm thin gradient of metallic elements at boride/boride and carbide/carbide interfaces. The sharp phase and grain boundaries do exhibit elemental enrichment from a trace amount of Fe being incorporated in interstitial positions of carbide and boride grains locally at boride/carbide boundaries or are present in boride and carbide grains in the form of continuous thin layer at boride/boride and carbide/carbide interfaces with the probably origin from starting powders.