Chrome Extension
WeChat Mini Program
Use on ChatGLM

Passive Flow Modification Over the Supersonic and the Hypersonic Air- Intake System Using Bleed

FME TRANSACTIONS(2023)

Cited 0|Views0
No score
Abstract
The air intake should be operated at design conditions to achieve a high total pressure recovery and optimum mass capture ratio. The current research focuses on the numerical simulation of the supersonic and hypersonic air inlet and its starting and unstarting characteristics. 2D RANS equation for supersonic and hypersonic intake has been solved using the k-& omega;SST turbulence model. The in-house code and the algorithm based on the RANS equation have also been validated in due process and used for subsequent simulations. The sudden drop in mass capture ratio indicates the unstart condition of the intake. The presence of a bleed section has a commendable effect on the performance parameter of the air intake. A separation bubble was observed at the intake's entrance during the off-design conditions, resulting in performance losses. Four different bleed sections ranging in size from 1.6mm to 8.6mm were used, and simulations with bleed were run for different Mach numbers ranging from 3 to 8. The optimum bleed size of 3mm has been found quite effective in modifying Total pressure recovery within the optimum mass flow rate over the wide range of Mach numbers.
More
Translated text
Key words
passive flow modification,supersonic,air-intake
AI Read Science
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined