Combustion synthesis of Eu2O3 nanomaterials with tunable phase composition and morphology

Combustion reactions in europium nitrate - acetylacetone - 2-methoxyethanol solutions and gels were investigated to produce europium (III) oxide (Eu2O3) nanocrystalline materials and thin films. Thermal analyses of solutions indicated that the 2-methoxyethanol solvent also acts as a fuel in the absence of acetylacetone. Adding acetylacetone increases the overall heat of the reaction. Thermal analysis results revealed that the slow oxidation of unburned hydrocarbon residues follows the primary combustion reaction. Time-temperature profile measurements of the bulk combustion synthesis process in air and nitrogen atmospheres enabled the extraction of the maximum reaction temperature and the heating and cooling rates in the combustion zone. Several direct correlations exist between measured combustion parameters and the phase composition of the products. Combustion in air results in mixed-phase cubic and monoclinic nanocrystalline Eu2O3. Increasing the acetylacetone concentration in solutions increases the synthesis temperature and decreases the quantity of cubic Eu2O3. The reaction of solutions in a nitrogen atmosphere or diluted with Eu2O3 provides control of the product phase composition and reduces the quantity of the monoclinic phase. Transmission electron microscopy imaging shows that the Eu2O3 end products are highly porous aggregates of nanocrystalline particles. Electrospraying of reactive solutions onto different substrates followed by short annealing makes the preparation of Eu2O3 materials with diverse morphologies possible.