Systemic approach in the study of the properties and pressure-induced structural transformations in TaN: First-principles molecular dynamics simulations

First-principles molecular dynamics simulations were used to investigate pressure- and temperature-induced phase transitions in different TaN polymorphs. The driving forces and intermediate structures were established for the CoSn-like TaN (ε phase) to WC-type TaN (θ phase) and ε to NaCl type-TaN (δ phase) structural transformations that were observed in experiments and for the θ to hP4-194, θ to cP2-221, δ to cP2-221 and δ to tP4-129 phase transitions that were predicted in this investigation. Other possible TaN polytypes were systematically investigated and five new prospective phases were found: oP8-25, oP12-25, hP8-194, tP8-105 and tI8-109. All new structures are thermodynamically, dynamically and mechanically stable, and their formation energy is only slightly higher than that of the θ phase (by 0.014–0.032 eV/atom). The relative stability, electronic structure, chemical bonding, vibrational spectra, elastic moduli and their spatial anisotropy, Vickers hardness, fracture toughness, Debye temperature and optical properties (real and imaginary parts of the dielectric function, reflectivity spectrum) of the tantalum mononitrides mentioned above were systematically calculated and discussed. The oP12-25, tP8-105 and tI8-109 novel phases exhibit the Vickers hardness (33.1–34.2 GPa), fracture toughness (5.52–5.59 MPa m1/2) and Debye temperatures (609.7–616.1 K) that are higher compared to those of the known TaN structures. The TaN polytypes with the strong Ta-N bonds with minimal fraction of ionicity were found to possess the best mechanical properties. Further experimental investigations are highly desirable to confirm the results presented in this paper.