Daytime radiative cooling aerogel with favorable amphiphobic surface properties

ABS T R A C T Passive daytime radiative cooling technology without any electricity input offers great promise to mitigate carbon emissions and greenhouse effects. As a type of daytime radiative cooling emitters (DRCEs), daytime radiative cooling aerogel attracts a lot of attention and has great advantages in minimizing parasitic solar ab-sorption and reducing environmental heat gain. However, designing daytime radiative cooling aerogel with amphiphobic surface properties is still challenging. Herein, a novel daytime radiative cooling aerogel based on eco-friendly bacterial cellulose (BC) as the skeleton, modified barium sulfate (BaSO4) as functional particles and fluoride coating as amphiphobic surface modifier was developed by simple freeze-drying and spraying. The optimal daytime radiative cooling aerogel, designated as M-BC/BaSO4-14 (M-BC/BaSO4-14 refers to the modified BC/BaSO4 aerogel), exhibited a high average reflectivity (95.6%) and excellent average emissivity (98.1%). The M-BC/BaSO4-14 achieved a mean temperature drop of 6.64 & DEG;C and maximum temperature drop of 13.30 & DEG;C on a cloudy day, and a mean temperature drop of 8.49 & DEG;C and maximum temperature drop of 12.34 & DEG;C on a clear day. It should be noted that the temperature drop referred to the temperature inside the measurement box (called the inner ambient temperature throughout this article) not the true ambient temperature. Meanwhile, the M-BC/ BaSO4-14 aerogel exhibited favorable amphiphobic surface properties (water contact angle of about 151 & DEG;, ethylene glycol contact angle of 141 & DEG; and N-Hexadecane contact angle of 139 & DEG;) and daytime radiative cooling performance before and after self-cleaning changed insignificantly. This work provides a viable strategy for the simultaneous improvement of the spectral properties and amphiphobic surface properties of the DRCEs.