Micro-Deformation and Fracture Features of Ti834 Titanium Alloy under Fatigue Loading

A sustained load holding period imposed during fatigue loading is detrimental to material performances, causing a sharp decline in the fatigue life of near-& alpha; titanium alloys. Therefore, the deformation discrepancies of dwell fatigue (DF) and low cycle fatigue (LCF) were studied for Ti834 titanium alloy with bimodal structures in this work. The fractographies after dwell fatigue and low cycle fatigue testing were characterized using scanning electron microcopy (SEM), and the crack propagation paths at the subsurface were investigated using an optical microscope (OM). In order to reveal the mechanism of fatigue damage, detailed dislocation structures were observed using transmission electron microcopy (TEM). The crack propagation paths in microscales and the dislocation distributions were observed in the LCF and DF. The reasons for the discrepancies are also discussed in this work, which effectively enhances the understanding of the dwell failure procedures. The results show that the near basal cracks are formed under dwell fatigue, and the deformation is highly localized at the boundary of & alpha;(p) grains under dwell fatigue. In contrast, during low cycle fatigue, the sample tends to deform homogenously. An intergranular fracture along the primary & alpha;(p) grains is formed due to the localized deformation during dwell fatigue. However, a transgranular fracture is formed in the primary & alpha;(p) grains under low cycle fatigue.