Success Rate of Direct Pulp Capping with Conventional Procedures Using Ca (OH)₂ and Bioactive Tricalcium Silicate Paste vs. Laser-Assisted Procedures (Diode 980 nm, CO₂, and Er: YAG)

Direct pulp capping (DPC) is reliable in pulp exposure management. Objective: This study aimed to assess the success rate of DPC materials and different laser protocols. The included procedures were CO2 laser (n = 1147), Er: YAG laser (n = 69), and 980 nm diode laser (n = 124), on the one hand, and Ca (OH)(2) (n = 376) and bioactive tricalcium silicate paste, on the other (n = 279). Materials and methods: Data from 1995 DPC cases were included. For laser groups, irradiation was used to coagulate the pulp exposure followed by Ca (OH)(2) placement. Data with follow-up at 12, 24, and 36 months post-treatment were included. The irradiation parameters for the CO2 laser were as follows: energy density per pulse of 141 J/cm(2), 1 W power, 0.3 mm beam diameter, 100 ms pulse duration, and 1 Hz, and a series of five pulses maximum were delivered during 5 s. For the 980 diode lasers: 1.5 W power, continuous wave (CW), 400 & mu;m fiber diameter, contact mode, 190.98 W/cm(2) power density, and total delivered energy density of 2387 J/cm(2). For the Er: YAG laser: 0.5 W output power, 9.95 J/cm(2) energy density, a beam diameter of 0.8 mm, 300 & mu;sec pulse duration, 10 Hz, non-contact mode, irradiation with air without water spray, and an average irradiation time of 8-10 s. Results: At the 3-year follow-up, the success percentages were as follows: CO2 (88.01%) > Ca (OH)(2) (75.72%) > diode (70.01%) > Er: YAG (54.55%) > bioactive tricalcium silicate paste (51.1%). The timing of permanent filling (immediate or delayed), patient age, size of pulp exposure, tooth type, and exposure etiology significantly affected the success rate. Patients aged & LE; 35 years presented higher success (70.91%) compared to those & GE; 36 years (61.2%). Immediate permanent fillings increase the success rate (71.41%) compared to delayed permanent fillings (65.93%). Exposure in molars and premolars significantly lowers the success rate (60.3%) compared to canines and incisors (72.1%). Idiopathic pulp exposure presented higher success (72.58%) compared to caries-related causes (63.7%). Conclusion: The highest success rate was in the CO2 laser group followed by the diode and Ca (OH)(2), Er: YAG, and bioactive tricalcium silicate material (biodentine) groups. The age factor, filling timing, size of exposure, tooth type, and exposure etiology can significantly affect the success rate of DPC.