Corrosion behavior of strontium modified Al-12Si cast alloys in flowing and stagnant chloride containing media

The Al-12Si alloy was modified with strontium varied from 0.1% to 0.35% in order to unveil its effect on corrosion resistance in static as well as in flowing solution with and without 3.5% NaCl at pH-11. The Sr contents upto 0.18% changed the eutectic morphology to fine fibrous network beyond which, the acicular silicon begun to emerge. The corrosion resistance of both modified and unmodified Al-12Si alloy during flow reduced to as low as 30% of that observed during static condition. The 0.25% Sr containing alloy exhibited superior corrosion resistance to other variants including unmodified alloy. The Raman spectroscopy and XRD analyses of corrosion product unveiled the presence of bayerite on both unmodified and modified Al-12Si alloys, irrespective of presence of Cl- in the solution. The Sr additions, except 0.25%, degrades corrosion resistance of Al-12Si alloy in both during flow and static conditions. The corrosion resistance of 0.25% Sr is correlated to the evolution of thicker and different oxide morphology along with presence of relatively large silicon on the surface after corrosion.