Study on adsorption of ammonia nitrogen by sodium-modified kaolin at calcination temperature

Natural kaolin (NK) is not used as a material for removal of ammonia nitrogen in wastewater because of its low ammonia adsorption capacity. In this study, sodium-modified kaolin adsorbent (NaCK) with high ammonia nitrogen adsorption capacity was prepared by NaOH modification of calcined NK, which was developed to address this problem. The adsorption properties were evaluated by batch static adsorption test. The results showed that when the initial concentration of ammonia nitrogen was 10 mg/L, pH = 8, and dosage of adsorbent was 1 g/L, the adsorption capacity of NaCK-600 for ammonia nitrogen was the best, reaching 6.23 mg/g, which was 34.6 times higher than that of NK (0.18 mg/g). Batch static adsorption test combined with adsorption kinetics, adsorption isothermal, and characteristic data showed that NaCK prepared at different temperatures had different adsorption mechanisms. Batch static adsorption test data of NaCK-600 was in good agreement with the pseudo-second-order model and Langmuir model, and the main mechanism of its adsorption of ammonia nitrogen was the ion exchange of NH 4 + and Na + in NaCK. After the third cycle, the removal rate of NaCK-600 was still up to 76.44%, which indicates that NaCK-600 has considerable potential for removal of ammonia nitrogen in wastewater and provides a new way for the application of kaolin in removal of ammonia nitrogen.