SLAMICP Library: Accelerating Obstacle Detection in Mobile Robot Navigation via Outlier Monitoring following ICP Localization.

The Iterative Closest Point (ICP) is a matching technique used to determine the transformation matrix that best minimizes the distance between two point clouds. Although mostly used for 2D and 3D surface reconstruction, this technique is also widely used for mobile robot self-localization by means of matching partial information provided by an onboard LIDAR scanner with a known map of the facility. Once the estimated position of the robot is obtained, the scans gathered by the LIDAR can be analyzed to locate possible obstacles obstructing the planned trajectory of the mobile robot. This work proposes to speed up the obstacle detection process by directly monitoring outliers (discrepant points between the LIDAR scans and the full map) spotted after ICP matching instead of spending time performing an isolated task to re-analyze the LIDAR scans to detect those discrepancies. In this work, a computationally optimized ICP implementation has been adapted to return the list of outliers along with other matching metrics, computed in an optimal way by taking advantage of the parameters already calculated in order to perform the ICP matching. The evaluation of this adapted ICP implementation in a real mobile robot application has shown that the time required to perform self-localization and obstacle detection has been reduced by 36.7% when obstacle detection is performed simultaneously with the ICP matching instead of implementing a redundant procedure for obstacle detection. The adapted ICP implementation is provided in the SLAMICP library.