A 134-nW Single BJT Bandgap Voltage and Current Reference in 0.18-µm CMOS

This paper presents a sub-microwatt sub-bandgap voltage and current reference that can generate proportional-to-absolute-temperature (PTAT) and complementary-to-absolute-temperature (CTAT) currents concurrently. The voltage reference is derived from the process-insensitive silicon bandgap voltage of a bipolar junction transistor, whereas the current reference is made by combining PTAT and CTAT currents. Line regulation is improved by incorporating cascode devices without an operational amplifier (opamp). Fabricated in a standard 0.18-µm CMOS process, the proposed bandgap reference occupies an active area of 0.4 mm 2 . The current and voltage reference ( I_REF and V_REF ) are measured as 170 mV and 21 nA, respectively, while the start-up settling response is measured as 20 ms at room temperature. The average temperature coefficient of I_REF and V_REF is 79.8 ppm/°C and 87.93 ppm/°C across the temperature range from − 40 to 120 °C, respectively. The power consumption is 134 nW at the minimum supply voltage of 1.2 V. The power supply ripple rejection of V_REF is measured as − 10 dB at 100 kHz without any filtering capacitor, when the 1.6 V input line voltage is distorted by a 300-mVp-p ripple. The measured line sensitivity of the voltage and current reference is 0.142