Prestress monitoring for prestress tendons based on the resonance-enhanced magnetoelastic method considering the construction process

Monitoring the prestress of prestressed concrete structures is hard but helpful. The resonance-enhanced magnetoelastic (REME) sensor could measure the stress of steel, but the measurement is influenced by the stress history. Thus, after analyzing the principle of the REME method according to the electric circuit theorem, the construction process and stress history of different prestress tendons were discussed. The prestress monitoring experiment showed that the induced voltage-prestress relationship was influenced by the stress history. To evaluate the prestress, a prestress evaluation method suitable for prestress steel strands was proposed. Using the precise calibration method, the monitoring errors in the construction stage and the prestress loss stage were less than 13.26% and 5.97%. The simplified calibration method reduced the workload of the calibration by 50% while the monitoring error increased by less than 4%. In addition, using the self-calibration method can avoid the influence of the differences in steel strands, leading to higher monitoring accuracy.