The synthesis and super capacitive characterization of microwave-assisted highly crystalline -Fe₂O₃/Fe₃O₄ nanoheterostructures

A facile microwave-assisted solvothermal process for the synthesis of narrow-size distributed & alpha;-Fe2O3, & alpha;-Fe2O3/Fe3O4, and Fe3O4 nanostructures was demonstrated using PVP as a surfactant. During the reaction, the influence of the reaction media, such as the mixture of ethylene glycol and water on the formation of & alpha;-Fe2O3, & alpha;-Fe2O3/Fe3O4, and Fe3O4 was systematically studied. Interestingly, pure aqueous medicated solvothermal reaction conferred phase pure rhombohedral Fe2O3 (hematite) and linearly upsurging the formation of cubic Fe3O4 (magnetite) with the increasing concentration of EG and further, in pure EG, it deliberated cubic Fe3O4. FESEM and FETEM images of & alpha;-Fe2O3/Fe3O4 nano heterostructure clearly showed the nanosized Fe3O4 particles of 4-6 nm decorated onto Fe2O3 nanoparticles. Further, the electrochemical properties of & alpha;-Fe2O3, & alpha;-Fe2O3/Fe3O4, and Fe3O4 nanoparticles were investigated with galvanostatic charge-discharge and cyclic voltammetry measurements using a 3-electrode system. The findings show that their specific capacitances are linked to the type of iron oxide. More significantly, the & alpha;-Fe2O3/Fe3O4 nanoheterostructure exhibited the utmost capacitance of 165 F g(-1), which is greater than that of pristine & alpha;-Fe2O3 and Fe3O4. Enhancement in the electrochemical performance was found due to the improved charge transfer that occurred at the interface of the nanoheterostructure. The nanoparticles of Fe3O4 deposited on the Fe2O3 increased the active sites, which accelerated the process of adsorption and desorption of ions, thereby enhancing the interface-assisted charge transfer and reducing the internal resistance, which is ultimately responsible for enhanced capacitance. Such heterostructures of nano iron oxide may fulfill the requirements of electrodes in supercapacitors.