Investigation on removal of perfluorooctanoic acid (PFOA), perfluorooctane sulfonate (PFOS), perfluorohexane sulfonate (PFHxS) using water treatment sludge and biochar.

This work assessed the adsorption performance of three common PFAS compounds (PFOA, PFOS and PFHxS) on two water treatment sludges (WTS) and two biochars (commercial biomass biochar and semi-pilot scale biosolids biochar). Of the two WTS samples included in this study, one was sourced from poly-aluminium chloride (PAC) and the other from alum (Al2(SO4)3). The results of experiments using a single PFAS for adsorption reinforced established trends in affinity - the shorter-chained PFHxS was less adsorbed than PFOS, and the sulphates (PFOS) were more readily adsorbed than the acid (PFOA). Interestingly, PAC WTS, showed an excellent adsorption affinity for the shorter chained PFHxS (58.8%), than the alum WTS and biosolids biochar at 22.6% and 41.74%, respectively. The results also showed that the alum WTS was less effective at adsorption than the PAC WTS despite having a larger surface area. Taken together, the results suggest that the hydrophobicity of the sorbent and the chemistry of the coagulant were critical factors for understanding PFAS adsorption on WTS, while other factors, such as the concentration of aluminium and iron in the WTS could not explain the trends seen. For the biochar samples, the surface area and hydrophobicity are believed to be the main drivers in the different performances. Adsorption from the solution containing multiple PFAS was also investigated with PAC WTS and biosolids biochar, demonstrating comparable performance on overall adsorption. However, the PAC WTS performed better with the short-chain PFHxS than the biosolids biochar. While both PAC WTS and biosolids biochar are promising candidates for adsorption, the study highlights the need to explore further the mechanisms behind PFAS adsorption, which could be a highly variable source to understand better the potential for WTS to be utilized as a PFAS adsorbent.