A High-Reliability RF MEMS Metal-Contact Switch Based on Al-Sc Alloy.
Micromachines(2023)
Abstract
This paper presents a new metal-contact RF MEMS switch based on an Al-Sc alloy. The use of an Al-Sc alloy is intended to replace the traditional Au-Au contact, which can greatly improve the hardness of the contact, and thus improve the reliability of the switch. The multi-layer stack structure is adopted to achieve the low switch line resistance and hard contact surface. The polyimide sacrificial layer process is developed and optimized, and the RF switches are fabricated and tested for pull-in voltage, S-parameters, and switching time. The switch shows high isolation of more than 24 dB and a low insertion loss of less than 0.9 dB in the frequency range of 0.1-6 GHz.
MoreTranslated text
Key words
RF MEMS,switch,Al-Sc alloy,S-parameters
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined