The energy assessment of COVID-19 medical waste as a potential fuel

The COVID-19 pandemic has caused huge health and economic damages. Various protective face masks, such as single-use, cotton, and the most widespread FFP2 or KN95 masks, are used to prevent the spread of this virus. However, these face masks are usually packaged in plastic packaging, which increases the amount of plastic waste. Plastic gloves are also often used in the connection of the pandemic. All this leads to a large production of protective equipment, but their use contributes to the increase of this type of waste, which presents a new challenge in waste management. This article investigates a complete element analysis of these mentioned materials and observes potential harmful substances. Further, pellets, as a potential fuel for combustion or pyrolysis purposes, were produced with the content of 5% and 10% of face masks. FFP2 were firstly separated from ear straps and wires, then disintegrated, added to spruce sawdust, and compressed into pellets. A series of experiments were realized and aimed at elemental, thermogravimetric, and calorific value analyses of produced pellets. Based on the results, it can be concluded that the presence of face masks FFP2 in pellets increases the content of carbon, hydrogen, and nitrogen, volatile matter, and calorific values, but decreases the content of fixed carbon. According to elemental analysis of produced pellets, no significant amounts of harmful elements were found. (c) 2023 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).