Towards pluvial flooding hazard assessment in an urban environment

<p>Urban pluvial floods are considered as a ubiquitous hazard. The increase in intensity and frequency of extreme rainfall events, combined with high population density makes urban areas vulnerable to pluvial flooding. Pluvial floods could occur anywhere depending on the existence of minimal areas for surface runoff generation and concentration. Detailed hydrologic and hydrodynamic simulations are computationally expensive and resource-intensive. This study applies two computationally inexpensive approaches to identify risk areas for pluvial flooding. One approach uses common GIS operations to detect flood-prone depressions from a high-resolution 1m x 1m Digital Elevation Model (DEM), to identify contributing catchments, and to represent runoff concentration by a fill-spill-merge approach. The second approach employs GIS to identify pluvial flood-prone hotspots in terms of the topographic wetness index (TWI).&#160; Based on the exceedance of a TWI threshold, flood-prone areas are identified using a maximum likelihood method. The threshold is estimated by comparing the TWI to inundation profiles from a two-dimensional (2D) hydrodynamic model (TELEMAC 2D), calculated for various rainfall depths within a given spatial window. The two approaches are applied to two flooding hotspots in Berlin, which have been repeatedly subject to pluvial flooding in the last decades and the outputs are compared against the detailed output from TELEMAC 2D.&#160;</p>