Dual-Modal Electrical Imaging of Two-Phase Flow - Experimental Evaluation of the State Estimation Approach.

Accurate measurement of two-phase flow quantities is essential for managing production in many industries. However, the inherent complexity of two-phase flow often makes estimating these quantities difficult, necessitating the development of reliable techniques for quantifying two-phase flow. In this paper, we investigated the feasibility of using state estimation for dynamic image reconstruction in dual-modal tomography of two-phase oil-water flow. We utilized electromagnetic flow tomography (EMFT) to estimate velocity fields and electrical tomography (ET) to determine phase fraction distributions. In state estimation, the contribution of the velocity field to the temporal evolution of the phase fraction distribution was accounted for by approximating the process with a convection-diffusion model. The extended Kalman filter (EKF) and fixed-interval Kalman smoother (FIKS) were used to reconstruct the temporally evolving velocity and phase fraction distributions, which were further used to estimate the volumetric flow rates of the phases. Experimental results on a laboratory setup showed that the FIKS approach outperformed the conventional stationary reconstructions, with the average relative errors of the volumetric flow rates of oil and water being less than 4%. The FIKS approach also provided feasible uncertainty estimates for the velocity, phase fraction, and volumetric flow rate of the phases, enhancing the reliability of the state estimation approach.