Using Distributed Acoustic Sensing to Monitor and Investigate Eruptive Events at Stromboli Volcano, Italy

<p>Volcano seismology is essential for understanding, monitoring, and forecasting eruptive events. The use of distributed acoustic sensing (DAS) technology can be particularly useful for this purpose because of its high temporal and spatial resolution, which may help to overcome the challenges of deploying and maintaining seismic arrays on volcanoes.</p> <p>Between 2020 and 2022, we installed 4 km of optical fibre on Stromboli volcano, Italy, whose persistent activity is well-suited for investigating the related dynamic strain rate. The cable was buried at a depth of 30 cm and the layout geometry was designed to provide wide coverage while being constrained by natural obstacles and topographical features. Seismometers were also installed along the fibre. DAS data were collected using a Febus A1-R interrogator, and the acquisition period increased from one week in 2020 to over four months in 2022. We recorded volcanic tremor, ordinary explosions (several per hour), two major explosions in 2021 and 2022, and the entire sequence of a pyroclastic flow in 2022.&#160;</p> <p>DAS and seismic data show good agreement in both time and frequency domains after converting strain rate to velocity and vice versa using different methodologies. Beamforming of DAS data shows a dominant signal in the 3-5 Hz frequency band coming from the active craters. We will also present preliminary results of major explosions and pyroclastic flow. This experiment demonstrates that DAS can be used for monitoring volcanic activity.</p>