Electron cyclotron heating assisted start-up experiments in J-TEXT

EPJ Web of Conferences(2023)

引用 0|浏览32
暂无评分
摘要
Electron cyclotron heating (ECH) breakdown and burn-through assist has been adopted to make the ITER start-up, which uses a low toroidal electric field of about 0.3 V/m, more robust. Related studies have been carried out on many fusion machines such as DIII-D, JT-60U, Tore Supra and FTU. However, the required ECH power to ensure an effective breakdown assist at ITER is not yet clear. Experiment was also performed in J-TEXT to determine the minimum ECH power requirements to assist breakdown and develop a better physics description of the process. The breakdown loop voltage for a successful shot was reduced from 34 to 3.7 V (corresponding to 0.56 V/m) by 300 kW X2-mode ECH power. The critical ECH power to assist the successful formation of a tokamak discharge is about 200kW, and below this value, ionization caused by ECH power is observed, however, the tokamak discharge start-up does not succeed. The effect of different loop voltages and ECH pulse-width on start-up was also studied. As injecting ECH power at a proper time, low ECH power can achieve a similar pre-ionization result as the case with high power. Extremely low breakdown voltage leads to a higher toroidal field later when putting a capacity to continue discharging in J-TEXT. The earlier shutdown of ECH power caused a failed discharge.
更多
查看译文
关键词
electron,experiments,j-text
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要