Chemical Viscosity Reduction of Heavy Oil by Multi-Frequency Ultrasonic Waves with the Main Harmonics of 20-60 kHz

Ultrasound technologies are well-known for their ability to intensify the heat and mass transfer processes. Hence, ultrasonic treatment processes are widely applied for the separation of oil-water emulsions, optimization of oil pumping processes, cleaning the bottomhole zone, etc. However, the main phenomenon under the positive influence of ultrasonic waves on such processes is the cavitation bubbles implosion on the water-oil boundary. It is well-known that ultrasound energy contributes to the reversible viscosity reduction in heavy oil systems. However, it is possible to exhibit chemical destruction of the weakest carbon-heteroatom bonds in the structure of the asphaltenes. This study investigates the influences of controllable ultrasound waves with frequency ranges of 20-60 kHz under the exposure time of 60 s on the rheology of a heavy crude oil sample produced from the Ashalcha reservoir (Tatarstan Republic, Russia). The specific feature of this study is the application of multi-frequency ultrasonic exposure with a wide spectrum of side harmonics with the frequency up to 400 kHz. The results of the Saturates, Aromatics, Resins and Asphaltenes (SARA) analysis method support the chemical consequences of ultrasonication of crude oil. The content of resins under the irradiation of ultrasound waves altered from 32.5 wt.% to 29.4 wt.%, while the number of aromatics hydrocarbons raised from 24.3 wt.% to 34.1 wt.%. The Gas Chromatography-Mass Spectroscopy (GC-MS) analytical analysis method was applied to qualitatively compare the composition of saturated and aromatics fractions between the initial and upgraded heavy crude oil in order to show the chemical destruction of asphaltene bonds after the ultrasonic treatment. It was demonstrated that ultrasound waves allowed chemical conversion of asphaltene fragments that led to irreversible viscosity reduction. The viscosity of the heavy oil sample under the favorable ultrasonic irradiation conditions reduced from 661.2 mPa center dot s to 178.8 mPa center dot s. This advantage can be used to develop enhanced oil recovery methods and partial upgrading processes in downstream conditions.