Development and characterization of novel surface engineered Depofoam: a QbD coupled failure modes and effects analysis risk assessment-based optimization studies

This study aimed to design and develop novel surface-engineered Depofoam formulations to extend the drug delivery to the prescribed time. The objectives are to prevent the formulation from burst release, rapid clearance by tissue macrophages, and instability and to analyze the impact of process and material variables in the characteristics of formulations. This work employed a quality-by-design coupled failure modes and effects analysis (FMEA)-risk assessment strategy. The factors for the experimental designs were chosen based on the FMEA results. The formulations were prepared by the double emulsification method followed by surface modification and characterized in terms of critical quality attributes (CQAs). The experimental data for all these CQAs were validated and optimized using the Box-Behnken design. A comparative drug release experiment was studied by the modified dissolution method. Furthermore, the stability of the formulation was also assessed. In addition, the impact of critical material attributes and critical process parameters on CQAs was evaluated using FMEA risk assessment. The optimized formulation method yielded high encapsulation efficiency (86.24 +/- 0.69%) and loading capacity (24.13 +/- 0.54%) with an excellent zeta potential value (-35.6 +/- 4.55mV). The comparative in vitro drug release studies showed that more than 90% of the drug's release time from the surface-engineered Depofoam was sustained for up to 168 h without burst release and ensured colloidal stability. These research findings revealed that Depofoam prepared with optimized formulation and operating conditions yielded stable formulation, protected the drug from burst release, provided a prolonged release, and sufficiently controlled the drug release rate.