Investigation of fatigue failure and energy characteristics of rock exposed to complicated stress disturbance paths: Cyclic stress amplitude effect

To deeply reveal the differences in geomechanical responses of rock during mining exposed to complicated stress disturbance of excavation unloading and cyclic loading conditions, cyclic triaxial fatigue loads with four cyclic stress amplitude (CSA) (60, 100, 130, and 160 MPa) were performed on deeply buried rock. Results show that rock deformation, energy evolution, and failure modes are all influenced by the CSA. Additionally, it is found that all the strain energy increases with increasing CSA during rock failure. Especially, the dissipated energy increases greatly at the confining stress unloading stage (CSUS) than the fatigue loading stage (FLS), indicating the influence of unloading on rock damage accumulation. Moreover, a damage evolution model reflecting a first slow and then quick increase pattern was established using the dissipated energy. Finally, a transition failure mode from the dominant tensile-shear to pure shear is found. It is suggested that much more energy needs to be consumed to induce shear cracks than tensile cracks.