FPGA-Flux Proprietary System for Online Detection of Outer Race Faults in Bearings

Online fault detection in industrial machinery, such as induction motors or their components (e.g., bearings), continues to be a priority. Most commercial equipment provides general measurements and not a diagnosis. On the other hand, commonly, research works that focus on fault detection are tested offline or over processors that do not comply with an online diagnosis. In this sense, the present work proposes a system based on a proprietary field programmable gate array (FPGA) platform with several developed intellectual property cores (IPcores) and tools. The FPGA platform together with a stray magnetic flux sensor are used for the online detection of faults in the outer race of bearings in induction motors. The integrated parts comprising the monitoring system are the stray magnetic flux triaxial sensor, several developed IPcores, an embedded processor for data processing, and a user interface where the diagnosis is visualized. The system performs the fault diagnosis through a statistical analysis as follows: First, a triaxial sensor measures the stray magnetic flux in the motor's surroundings (this flux will vary as symptoms of the fault). Second, an embedded processor in an FPGA-based proprietary board drives the developed IPcores in calculating the statistical features. Third, a set of ranges is defined for the statistical features values, and it is used to indicate the condition of the bearing in the motor. Therefore, if the value of a statistical feature belongs to a specific range, the system will return a diagnosis of whether a fault is present and, if so, the severity of the damage in the outer race. The results demonstrate that the values of the root mean square (RMS) and kurtosis, extracted from the stray magnetic field from the motor, provide a reliable diagnostic of the analyzed bearing. The results are provided online and displayed for the user through interfaces developed on the FPGA platform, such as in a liquid crystal display or through serial communication by a Bluetooth module. The platform is based on an FPGA XC6SLX45 Spartan 6 of Xilinx, and the architecture of the modules used are described through hardware description language. This system aims to be an online tool that can help users of induction motors in maintenance tasks and for the early detection of faults related to bearings.