Failure Analysis and Accelerated Test Development for Rotor Magnetic Bridge of Electric Vehicle Drive Motor

Motor rotor magnetic bridges operate under multiple physical field loads, such as electromagnetic force, temperature, and centrifugal force. These loads can cause fatigue and aging failure of the bridges, especially when the rotor is operating continuously at high speeds and high temperatures. Therefore, the failure analysis and accelerated test cycle development of magnetic bridges is a major aspect of their reliability evaluation. This paper studies rotor multi-physics load transfer characteristics and establishes a rotor magnetic bridge failure physical model. A simulation analysis is conducted from the electromagnetic field, thermal field, structural field, and thermomechanical coupling field to determine the risk point load responses and failure-dominant loads. In addition, the accuracy of the simulation model is verified by actual bench tests. Considering the influence on the rotor bridge's life under the coupling of multiple failure modes, the fatigue failure model under alternating loads and the fatigue aging coupling failure model are established, respectively. Through a damage analysis, the whole life cycle damage targets for both failure modes are determined, and the test condition levels are screened based on the load frequency distribution and damage distribution. The multi-objective optimization method is used to calculate the number of test cycles and finally develop accelerated test cycle conditions that can reproduce multiple failure modes. This research can provide support for rotor bridge reliability design and verification, as well as product quality development.