An improved predictive current control for IM drives

In Finite Control Set-Model Predictive Control (FCS-MPC), the model of the induction machine (IM) is expressed in the a -b or d -q reference frame, and then the back-EMF is estimated based on the applied voltage vectors. In this work, the d-q reference frame is used but unlike the existing method, the esti-mated back-EMF is calculated by filtering the voltage vectors. Moreover, the work studies the importance of the discretization method on the predictive control behavior of IM. It has been demonstrated that the mentioned enhancements lead to an efficient Total Harmonic Distortion value for stator current (THDi) and torque ripple reduction compared to the conventional methods. The proposed Predictive Current Controller (PCC) has been validated experimentally by using a commercial IM of 7:5[kW] controlled by a dSpace 1103 real-time control board running with sample frequencies from 10[kHz]to 80[kHz]. The test results validate the developed controller's ability to meet the control objectives in a whole range of speeds, loads, and sampling frequencies.(c) 2022 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Ain Shams Uni-versity. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).