Plasma Wall Interaction of New Type of Divertor Heat Removal Component in LHD Fabricated by Advanced Multi-Step Brazing (AMSB)

A novel method, called Advanced Multi-Step Brazing, was developed to fabricate a new type of divertor heat removal component with W armor and an oxide-dispersion-strengthened copper (GlidCop((R))) heat sink in the initial phase of our work. Later, a new type of divertor heat removal component, which has a rectangular-shaped cooling channel with a V-shaped staggered-rib structure in the GlidCop heat sink, was developed. This new component showed an extremely high heat removal capability during a similar to 30 MW/m(2) steady-state heat loading condition in our previous work. In this work, the new component was installed in the divertor strike position of the Large Helical Device and exposed to neutral beam injection-heated plasma discharges with 1180 shots (similar to 8000 s) in total. Though submillimeter-scale damage, such as unipolar arc trails and microscale cracks, was identified on the W surface, the extremely high heat removal capability did not show any sign of degradation over the experimental period. On the other hand, remarkable sputtering erosion and redeposition phenomena, due to the strong influx of the divertor plasma, was confirmed on the W armor.