An in-silico proof-of-concept of electrohydrodynamic air amplifier for low-energy airflow generation

Electrohydrodynamic (EHD) technology generates airflow without moving parts, making it a reliable solution for various low-energy applications. EHD-based airflow devices enhance airflow patterns, resulting in significant energy savings in air-moving systems. This airflow, also known as ionic wind, is created through Corona discharge, which accelerates electrically charged air molecules in a strong electric field. Currently, EHD's low electrical-to-mechanical energy conversion rate still limit its ability to generate large flow rates. The objective of this study is to enhance the flow rate of EHD-based devices, for applications where EHD can be used as an effective auxiliary technology with low pressure lift, to enhance airflow distribution and circulation. To this end, a novel bladeless air propulsion device is proposed that combines ionic wind with air amplification based on the Coanda phenomenon to amplify EHD-generated flow rates. We assess the performance of the bladeless air propulsion device to generate airflow by investigating fluid dynamics, electrostatics, and energy consumption. We demonstrate the proof-of-concept with an innovative fully-coupled simulation approach for corona discharge and EHD modeling. We explore different design parameters on the conceptual EHD air amplifier, such as the electric potential (10-30 kV) of the discharge electrode, the electrode spacing (5-25 mm), and the channel height (30-150 mm). The studies are performed on a 2D constrained channel flow and a 2D-axisymmetric open space design, respectively. In order to quantify the benefit of air amplification on EHD, the results are benchmarked to a regular EHD setup without amplifying vane as well as to a comparable commercial axial fan. We assess the performance in terms of flow rate per electric power input. Here, the EHD air amplifier in the constrained flow configuration increases the total flow rate by 59% compared to regular EHD and 48% compared to the axial fan for the same electrical energy input. Amplification factors of 16.5-19 are achieved for the constrained config-uration and 5.5 to 6.4 for the open space configuration. The predicted energy consumption is 4-17.5 W for the open space configuration, resulting in flow rates up to 140 m3 h-1. These results show that EHD air amplification is a promising way to generate high flow rates with low pressure rise at a low electrical cost, by which it can provide a more sustainable alternative to conventional fans in specific applications..