Solar driven hydrothermal processing of biomass: reactor operation and products characteristics

The use of concentrated solar energy to provide heat in the hydrothermal liquefaction is an attractive method to transform biomass into valuable products reducing the environmental impact. However, the coupling of both technologies requires further research. This work analyses the effect of solar fluctuations on the yields, and main characteristics of products obtained in a solar reactor with direct heating method. Results indicate that by direct heating in a solar furnace, at sustained reaction temperatures of 250 degrees C, produced a bio-oil and char yield up 24 and 33%, respectively. The results are consistent with conventional heating systems, however direct heating results in higher temperature gradients between the frontal and nonirradiated walls (above 200 degrees C), which results in an unstable system, especially at high heating rates and temperatures above 300 degrees C, therefore, at the end of this work a modified solar reactor was proposed.