Experimental Study of Acid Etching and Conductivity of High-Temperature-Resistant Cross-Linked Acid

Acid fracturing is one of the effective techniques for developing low-permeability carbonate reservoirs economically. With the increasing reservoir depth, the reservoir temperature and closure pressure increase, posing new challenges to the acid system. In this paper, a high-temperature-resistant cross-linked acid system is selected, which maintains a viscosity above 80 mPa center dot s in the temperature range of 120 degrees C to 140 degrees C and can effectively reduce acid leak-off. The acid system can not only open the reservoir and ensure the extension of the fracture, but also reduce the reaction rate between the acid and the reservoir and increase the etching distance. The rock slab acid etching and conductivity tests show that the optimum injection rate is 50 mL/min, the rock etching morphology is channel type, and the conductivity remains above 110 D center dot cm. However, as the acid concentration decreases, the rock slab conductivity decreases considerably, especially at 10% acid concentration, where the closure pressure rises to 15 MPa, and there is almost no conductivity. In particular, after the acid system is broken, the reacted acid can form a filter cake on the core surface, hindering further intrusion of the residue into the core and reducing reservoir damage. The study shows that high-temperature-resistant cross-linked acid systems can effectively improve the stimulation of deeply fractured carbonate reservoirs at high temperatures.