Kinetics of Martensite Decomposition and Microstructure Stability of Ti-6246 during Rapid Heating to Service Temperatures

The aerospace alloy Ti-6246 was subjected to inductive heat treatments with high heating and quenching rates (up to 1500 K/s) while being applied to an in situ diffraction study at the HEMS beamline P07B at DESY. Thereby, the characterization of the emerging phases was possible at any point in the process. The heat treatment schedules include the preparation of Ti-6246 samples by means of a homogenization treatment and subsequent quenching to trigger a?-martensite formation. In order to simulate fast reheating within the scope of application, the samples were reheated to the upper range of possible service temperatures (550-650 degrees C) with a heating rate of 100 K/s. In a second heat treatment design, the homogenized and quenched sample state was exposed to high temperature tempering at 840 degrees C, which aims for the elimination of a?. Again, fast reheating to the same service temperatures was executed. With the aim of this approach, the stability of the microstructure consisting of a-Ti, 8 -Ti and a?-martensite was characterized. Further, the martensite decomposition path was analyzed. It shows a two-tier nature, firstly approaching the bcc 8 -unit cell in the low-temperature range (<400 C) but subsequently transforming into an hcp-like unit cell and later on into equilibrium a-Ti.