Mitigate the LFM-PRFI in SAR Data: Joint Down-Range and Cross-Range Filtering.

Synthetic aperture radar (SAR), an active remote sensing equipment, shares the spectrum with devices in the same frequency band and is, therefore, easy to affect by pulse radio frequency interference (PRFI). The wideband version of PRFI, i.e., linear-frequency-modulation PRFI (LFM-PRFI), derived from the ground- and space-based radar sensors is a challenging issue for SAR because it usually has a large bandwidth and pulsewidth compared with the traditional PRFI. The well-known notch filtering methods, including time- and frequency-domain versions, are robust approaches against PRFI, which has been integrated into some SAR ground processing systems. However, the down-range frequency-domain notch filtering will increase the sidelobes of the targets when mitigating wideband LFM-PRFI, whereas the time-domain version will introduce ghosts when notching large pulsewidth ones. This article proposed a filtering method that consists of three steps to tackle the above problems. The first step is focusing the energy of LFM-PRFI down-range and cross-range simultaneously, which can be done by match filtering and Fourier transform. The second step is mitigating the LFM-PRFI, which can be done by a designed filter. The last step is data restoration, which can be done by multiplying the conjugate of the phase function used before. Numerical experiments based on simulated SAR data and measured spaceborne SAR data acquired by European Sentinel-1 are performed to test the mitigation performance, which verified the effectiveness and superiority of the proposed approach.