Influence of Ethanol Parametrization on Diffusion Coefficients Using OPLS-AA Force Field

Molecular dynamics simulations employing the all-atom optimized potential for liquid simulations (OPLS-AA) force field were performed for determining self-diffusion coefficients (D11) of ethanol and tracer diffusion coefficients (D12) of solutes in ethanol at several temperature and pressure conditions. For simulations employing the original OPLS-AA diameter of ethanol's oxygen atom (sOH), calculated and experimental diffusivities of protic solutes differed by more than 25%. To correct this behavior, the sOH was reoptimized using the experimental D12 of quercetin and of gallic acid in liquid ethanol as benchmarks. A substantial improvement of the calculated diffusivities was found by changing sOH from its original value (0.312 nm) to 0.306 nm, with average absolute relative deviations (AARD) of 3.71% and 4.59% for quercetin and gallic acid, respectively. The new sOH value was further tested by computing D12 of ibuprofen and butan-1-ol in liquid ethanol with AARDs of 1.55% and 4.81%, respectively. A significant improvement was also obtained for the D11 of ethanol with AARD = 3.51%. It was also demonstrated that in the case of diffusion coefficients of non-polar solutes in ethanol, the original sOH=0.312 nm should be used for better agreement with experiment. If equilibrium properties such as enthalpy of vaporization and density are estimated, the original diameter should be once again adopted.