Reducing particle emissions of heavy-duty diesel vehicles in India: Combined effects of diesel, biodiesel and lubricating oil

Diesel engines contribute significantly to deteriorating air quality. Tightening legislation has led to various technological advances, but developments differ between countries. In India, air quality has not improved and fine particle (PM2.5) related premature deaths are predicted to increase. In this study, we characterized the particle emissions of an Indian-manufactured BS IV (Bharat Stage, comparable to Euro emission standards) heavy-duty diesel vehicle and studied the effects of different fuels, fuel blends and lubricating oils. The main aims of the study were to investigate the particle emission dependency on fuel types and fuel blends used in India and to produce useful data for further use (e.g. legislative parties and modeling): emission factors (PN, PM, BC, other chemical compounds), size distributions and volatility of particles. Additionally, the sensitivity of the emissions to the lubricating oil choice was studied. Two lubricating oils, two fossil fuels conforming to BS IV and BS VI emission standards and two biofuel – BS IV fossil fuel blends were tested, one containing Renewable Paraffinic Diesel (RPD) and the other renewable Fatty Acid Methyl Ester (r-FAME). The tests were conducted on a chassis dynamometer (Delhi Bus Driving Cycle, DBDC). Our results show that the emitted particles were in ultrafine particle size range, and both the soot mode particles and smaller nanoparticles were affected by fuels and lubricating oils. The transition from BS IV grade diesel to BSVI was shown to have potential in reducing particle emissions (PN and eBC) of heavy-duty diesel vehicles in India. Blending fossil fuel with biofuel strongly affected particle number emissions, chemical composition, and eBC emissions and the emissions were highly sensitive to biofuel type. Changing the lubricating oil had a comparable magnitude of effect as changing the fuel and the results indicate that in order to reduce particle emissions, a combination of fuel and lubricating oil should be chosen, instead of choosing them separately.