Improving the Bio-Oil Quality of Residual Biomass Pyrolysis by Chemical Activation: Effect of Alkalis and Acid Pre-Treatment

In this study, we investigated the acid (HCl) and alkali (KOH) chemical activation of acai seeds (Euterpe Oleraceae, Mart.) pre-treatment before pyrolysis at temperatures of 350-450 degrees C in order to assess how reactions proceed when affected by temperature. Chemical composition of bio-oil and aqueous phase were determined by GC-MS and FT-IR. The bio-char is characterized by XRD. For the activation with KOH, the XRD analysis identified the presence of Kalicinite (KHCO3), the dominant crystalline phase in bio-char, while an amorphous phase was identified in bio-chars for the activation with HCl. The experiments have shown that bio-oil yield increases with temperature for the KOH activated biomass and decreases for the acid activated one. The KOH bio-oil is primarily composed of alcohols and ketones, showing the lowest acid values when compared with the HCl one, which is composed mainly of carboxylic acids and phenols. An increase in alcohol content and a decrease in ketones in the KOH bio-oil with temperature suggests conversion reactions between these two functions. For HCl bio-oil, carboxylic acid concentration increases with temperature while phenols decrease. For production of hydrocarbons, KOH activated biomass pyrolysis is better than acid-activated one, since no hydrocarbons were produced for HCl bio-oil.