Aqueous Two-Phase Systems Based on Cationic and Anionic Surfactants Mixture for Rapid Extraction and Colorimetric Determination of Synthetic Food Dyes

In this study, aqueous two-phase systems (ATPSs) containing a cationic and anionic surfactants mixture were used for the preconcentration of the synthetic food dyes Allura Red AC, Azorubine, Sunset Yellow, Tartrazine, and Fast Green FCF. A rapid, simple, low cost, affordable, and environmentally friendly methodology based on microextraction in ATPSs, followed by spectrophotometric/colorimetric determination of the dyes, is proposed. The ATPSs are formed in mixtures of benzethonium chloride (BztCl) and sodium N-lauroylsarcosinate (NaLS) or sodium dihexylsulfosuccinate (NaDHSS) under the molar ratio close to equimolar at the total surfactant concentration of 0.01–0.20 M. The density, viscosity, polarity, and water content in the surfactant-rich phases at an equimolar ratio BztCl:NaA were determined. The effects of pH, total surfactant concentration, dye concentration, and time of extraction/centrifugation were investigated, and the optimum conditions for the quantitative extraction of dyes were established. The smartphone-based colorimetric determination was employed directly in the extract without separating the aqueous phase. The analytical performance (calibration linearity, precision, limits of detection and quantification, reproducibility, and preconcentration factor) and comparison of the spectrophotometric and smartphone-based colorimetric determination of dyes were evaluated. The method was applied to the determination of dyes in food samples and food-processing industrial wastewater.