Adsorptive Removal of Reactive Yellow 145 Dye from Textile Industry Effluent Using Teff Straw Activated Carbon: Optimization Using Central Composite Design

This study aimed to optimize the preparation condition of activated carbon using Teff straw as a precursor material via evaluating its potential in terms of maximizing the adsorptive removal of Reactive Yellow 145 dye (RY 145) from aqueous solutions. Selective factors, such as activation time, activation temperature, and impregnation ratio on the preparation of Teff Straw-based Activated Carbon (TSAC) were optimized using response surface methodology (RSM). A quadratic regression model with estimated coefficients was developed by RSM and it was observed that model predictions were matched with experimental value with an acceptable R2 value (0.98). Further, the TSAC prepared at optimal condition was characterized using Fourier-transform infrared (FTIR), Scanning electron microscopy (SEM), and X-ray diffraction (XRD) techniques. The TSAC prepared at optimal condition showed anionic nature with a BET surface area of 627.7 m2/g. In addition, important adsorptive parameters (contact time, solution pH, adsorbent dose, and dye concentration) were evaluated through batch experiments. In such a way, it was determined that 2 h for activation time, 539 °C for activation temperature, and impregnation ratio of 5 g of phosphoric acid per 1 g of TSAC were optimal for efficient adsorption with maximum removal of 98.53% for RY 145 dye. In addition, the TSAC was subjected to test in order to determine its adsorptive performance by treating real textile industry effluent for examining its Chemical Oxygen Demand (COD) removal potential. The results showed that 76% COD was removed from the real textile effluent, which met Ethiopian Environmental Protection Authority (EPA) standard. The finding of this paper asserts that this material is a good and low-cost bio-sorbent that can be used for the removal of pollutants from textile wastewater. Nevertheless, additional investigations of the adsorbents including regeneration options are advisable to draw explicit conclusions.