Analysis of unsteady flow field and near-field aerodynamic noise of scale high-speed trains in long tunnel

The hybrid LES/APE method is used to simulate the unsteady flow field and the near-field aerodynamic noise of a 1/25 scale eight-coach high-speed train in long tunnel, validated by time-averaged pressure coefficients and Power Spectral Density of surface pressure from the aerodynamic wind tunnel test of a same scale two-coach train model. Train induced wind with the maximum velocity of 28 m/s in the opposite direction of train operating is formed in tunnel. Blocking effect leads to larger turbulent pressure and streamwise increment of turbulent power level from 133.7 dB to 138.2 dB, which is from130.3 dB to 133.4 dB in open air. With APE solver, three cases including tunnel with fully reflective walls, tunnel with fully absorptive walls and open air, are conducted to compare the influence of blocking effect and acous-tic reflection on sound pressure. Total sound pressure level on the train body in tunnel is overall stronger than that in open air. The difference of sound power level between tunnel and open air is mostly con-tributed by acoustic reflection: 84.7 % at Coach 1, 84.3 % at Coach 8 and 66.0 ti 77.5 % from Coach 2 to Coach 7. Five peak frequencies: 520 Hz, 800 Hz, 1440 Hz, 2600 Hz and 3880 Hz are found from the fre-quency spectra of sound pressure of the probes in bogie cavities and pantograph grooves, in tunnel with fully reflective walls. Sound pressure modes help to clarify the generation mechanisms of peak frequen-cies: 520 Hz and 800 Hz are caused by the tunnel cavity resonance; 1440 Hz is caused by the first-order vertical mode from the bottom of the pantograph groove to the top of tunnel walls; 2600 Hz is caused by the first-order vertical mode from the ground to the top of bogie cavity, but 3880 Hz is not generated by simple in-phase cavity resonance.(c) 2023 Elsevier Ltd. All rights reserved.